SA-20HH-G2
2/2 normally closed high-pressure solenoid valve · G2 coil
CS FLUIDPOWER SA-20HH-G2. 2/2 normally closed high-pressure solenoid valve (80 bar rating), forged brass body, piston type, PTFE seats. For liquids, gases, steam and oil up to 200 °C; differential pressure 0.5-80 kgf/cm². G2 = square DIN coil (WP-G2-D). Specify voltage, medium and thread when ordering.
Specifications
- Brand
- CS FLUIDPOWER
- Model
- SA-20HH-G2
- Size / rating
- 3/4 ″
- Material
- Forged brass
- Product configuration
- Pilot piston type
- Category
- Valve
- Flow paths
- 2/2
- Normal state
- Normally closed
- Structure
- Pilot piston type
- Orifice
- 20 mm
- Port size
- 3/4 ″
- Flow coefficient Cv
- 9.3
- Differential pressure range
- 0.5-80 kgf/cm² (bar)
- Fluid temperature
- -10 to 180 °C (oil up to 200 °C)
- Body material
- Forged brass
- Seat / seal material
- PTFE (Teflon)
- Dimensions A×B×C (ref. H2 coil)
- 85×60×141 mm
- Weight
- 1.53 kg
- Coil code
- G2
- Coil model
- WP-G2-D (square DIN connection)
- Optional coils
- Other coil options in the catalogue: GE2 / H2 (HT-A2) / EX explosion-proof; per the manufacturer (Oct 2026) only WP-G1-D, WP-G2-D and CS-D2-D coils are in production, all other coil types are discontinued
- Media
- Liquids (water/hot water), air, steam, oil (200 °C)
- Thread options
- PT (RC) / G-BSP (PF) / N-NPT / R-PS (RP), specified when ordering
- Order code
- SA-20HH-[coil]-[medium]-[voltage]-[thread], e.g. SA-20HH-G2-S-220VAC-G
- Mounting
- Horizontal piping with coil facing up recommended; voltage tolerance ±10%
- DC supply note
- With DC supply the allowable differential pressure is 70% of the AC rating
Please note: The specifications above are compiled from manufacturer published datasheets, official websites and other public sources, for reference only, and are not a basis for acceptance or inspection. Actual parameters, dimensions and configuration are subject to the latest manufacturer datasheet and the delivered goods; where any discrepancy exists, the manufacturer data shall prevail. Contact us if you need the original datasheet or confirmed data for ordering.